Jasic JT-300P, Operator'S Manual

Page: 29 / 52

29
REMOTE CONTROL SOCKET
The Jasic TIG 300P is fitted with 9 pin remote control socket located on the front panel which is used to
connect various TIG remote control options, for example, a TIG torch trigger switch a TIG torch mounted
current adjustment dial as well as a foot pedal or other similar remote device.
When fitting the 9 pin remote plug, ensure you align the keyway when inserting the plug, then rotate the
threaded collar fully clockwise until finger tight.
To select the appropriate
remote current control process,
press the remote button until
the LED is lit alongside your
chosen preference.
The 9 Pin plug & clamp Pt No
is JSG
- PLUG - 9PIN
Remote device activation
Without welding, press the remote until the panel LED is lit, this indicates that the machine
is ready for front panel current control.
Without welding, press the remote until the remote LED is lit, this indicates that the
machine is ready for an analog (potentiometer type) type torch control.
Without welding, press the remote until the foot pedal remote LED is lit, this indicates that
the machine is ready for a foot pedal type control.
Starparts Titanium Torch (Trigger only) wiring as follows:
Pin 8 - Trigger
Pin 9 - Trigger
Starparts Titanium Torch with analog remote current control
Jasic JFC - 08 Foot pedal wiring are as follows:
Pin 1 – Potentiometer Max
Pin 2 – Potentiometer Wiper
Pin 3 – Potentiometer Min
Pin 8 – Trigger
Pin 9 – Trigger
Starparts Titanium Torch with digital current control wiring
as follows:
Pin 4 – +
Pin 5 – -
Pin 6 – Parameter selection
Pin 8 – Trigger
Pin 9 – Trigger (Common)
9 Pin Remote socket configuration
Pin No Description
1 Potentiometer (min)
2 Potentiometer wiper
3 Potentiometer (max)
6 N/A
7 N/A
8 Torch switch
9 Torch switch
+
-
Parameter
selection
Switch