12
CONTROLS
Control panel view Jasic TIG 200P PFC
1. Digital meter: Displays pre-set and actual current before and during welding. Also used to display
any error message codes
2. Overheat LED: This LED will be lit when the machine enters overheat conditions. Welding will cease
whilst this LED is lit
3. Power LED: This LED will be lit when the mains supply is connected and the mains switch is on
4. Welding mode selection zone: Welding mode selection zone contains welding mode indicators and
selection key. Welding modes include DC TIG, Pulse TIG, DC MMA. Press the welding mode selection
key to choose the according welding mode. The welding mode selected will be indicated by the
corresponding LED being lit and there is welding current flowing
5. Adjustment knob: Push to select and rotate to adjust parameters
6. Parameter selection area: Pushing the adjustment knob will highlight the LED of the parameter to
be adjusted in the selection area
7. Arc force LED: When selected this will be lit and the arc force parameter can be adjusted. This LED
in TIG also indicates a remote control device is connected and activated
8. HF/Spot LED: Ignition and tack weld time
9. Latch/Spot selector switch: Use this selector to choose 2T, 4T or spot mode
10. Frequency LED: When lit the pulse frequency can be adjusted
11. Pulse duty LED: When lit the time on peak current during each pulse can be adjusted
