16
Only use compressed air with the Jasic plasma machines
Please Note: NEVER USE OXYGEN
Compressed Air Supplies
Sizing the appropriate compressor to use with your plasma cutting machine is as important as supplying
the correct mains power supply.
To get the best out of your plasma cutter you need to supply it with an adequate air supply. The below
are suggested questions that need to be considered when specifying an air compressor.
•
What is the maximum required operating pressure of the plasma cutter?
•
What is the maximum required CFM usage of the plasma cutter?
•
Does the machine need to be portable or stationary?
•
What type of drive do you require? Electric motor or diesel engine?
•
What receiver tank size will be needed?
•
Generally 3 phase compressors are considered a better option than single phase compressors.
The accessories used with the compressor are also important, providing the correct air pressure, air flow which is moisture and oil free is
crucial in ensuring that your plasma will give you quality cuts.
Air Hose:
Remember to select the correct bore size, considering demand and length.
Filters:
Remove contaminants e.g. water and oil thus prolonging plasma torch consumable life.
Dryers:
Refrigerant dryers, high efficiency heat exchangers.
Regulators: Allow adjustment to optimum pressure for efficient use of your plasma cutter. Regulate your system to the pressure you need.
Couplings: Heavy air use tools/equipment may need high flow couplings. Size matters.
PLEASE NOTE: Using oxygen in a plasma torch that is designed for air cutting can cause a serious fire and injury.
Be careful and always follow the manufacturer
’
s instructions.
Plasma Machine Gas Supply
-
Compressed Air
Wilkinson Star Technical
