5
Noise produced during welding can easily cause hearing loss
In order to avoid the harm of noise to you and others, please wear the prescribed
protective equipment.
Matters needing attention in hoisting
The power source with strap or hand is prohibited from using strap or hand for
lifting.
When lifting power source with lifting forklift truck, in order to prevent dumping,
please fork-fit and fix it from side.
When lifting power source with crane, the cable should be tied to the suspension
ring, and the angle between the cable and the vertical direction should not exceed
15 degrees.
When the power source with cylinder and wire feeder is hoisted, the two
equipments should be unloaded from the power supply first. When moving the
power source on the ground, it is necessary to fix the cylinder with a strap or chain
to prevent dumping and injuring people.
If the wire feeder is hoisted by lifting lugs for welding, it is necessary to ensure that
it is firm and insulated.
STOP
PLEASE NOTE that under no circumstances should any equipment or parts be altered or
changed in any way from the standard specification without written permission given by
our company. To do so, will void the Equipment Warranty.
Handle
Rings
Summary of Contents for ARC 160GS
Page 1: ...INVERTER WELDER ARC 160GS WELDING MACHINE USER MANUAL...
Page 20: ......