JASHEN F16 Series, User Manual

Page: 16 / 20

Note:
If the above troubleshooting guide fails to provide a solution, please contact us at
support@jashen.com or visit our website www.jashen.com for further support.
STORING YOUR MACHINE
Problem Possible cause Solution
The appliance does
not turn on
Weak suction
Brush roller tangled
indicator blinking
CWT empty i
ndicator blinking
DWT full indicator
blinking
All lights off in
operation
Battery indicator
blinking
Self-cleaning icon
blinking
MAX icon blinking
Out of power
Auto protection for overheating
Debris channel is blocked
The HEPA is dirty or not installed
1. The brush roller is blocked
2. The brush roller is not installed
CWT is empty
The dirty water in DWT has
reached the MAX line
Battery overheat or malfunction
Low battery
Brush roller is dirty
Motor malfunction
Charge the appliance
Restart after cooling down
Clean the debris channel and DWT
Clean and dry the HEPA
1. Remove blockages
2. Install brush roller correctly
Refill CWT
Empty the dirty water and
then reinstall the DWT
Cool the appliance down and
restart
Charge the appliance, or restart
Start self-cleaning
Contact Customer Service
17 www.jashen.com