JASHEN F16 Series, User Manual

Page: 11 / 20

1.
Recline the machine
Turn the machine ON by
pressing the Power Button.
Next, press the Mode
Button to switch between
the Standard mode and
Max Mode.
2.
to start the Brush Roll
spinning. Stand the
machine upright to stop
the Brush Roll from
spinning. * Do not recline
more than 142° to protect
against water leakage.
3.
Place the appliance on
the charging base vertically
after use for recharge and
storage.
CLEANING YOUR FLOORS
���°
ATTENTION:
• Do not vacuum foamed liquid.
• The cordless hard floor cleaner is to be used on indoor hard floors only, such as vinyl,
tile, sealed wood, etc. Use on a rough surface may not get the best performance.
• To vacuum water left on the surface, the appliance will switch off in 3 seconds after
power off.
Emptying the Dirty Water Tank
1.
Press the Dirty
Water Tank (DWT)
release button to
remove the DWT from
the appliance.
2.
Pull up the tank
lid.
3.
Separate the hair
and debris from the
dirty water by
grasping the strainer
tab and pulling up.
Throw the debris
into the trash.
4.
Pour the dirty
water into the sink
and rinse the Dirty
Water Tank.
www.jashen.com 11