3
Battery Installation
1. Press the battery release button on top of the mouse.
2. The battery door will open.
3. Insert 1 AA battery, being sure to match the polarity
of the battery with the polarity markings inside the
battery compartment.
4. Close the battery door.
Mouse Installation
1. Slide the USB Receiver out of the bottom of the mouse.
2. Once the receiver has been removed, the Battery Meter
will light up.
Green Light = battery life is good.
Red Light (Blinking slowly) = battery is low.
Red Light (Blinking rapidly) = change battery.
3. Insert the USB receiver into an available USB port.
The receiver has an LED on the top.
Green Light on Receiver = Mouse movement.
Red Light on Receiver = Low battery.
4. Please refer to page 6 of this manual for the
Mouse Suite Installation.
Battery Light
LED