5
5
Setting the direction of rotation and inching mode
Changing the direction of rotation of the motor
1.
Press the UP and DOWN buttons on the programmed transmitter at the same time. Then press the STOP button four times.
2.
Now press the UP button briefly inside 5 seconds. The motor will confirm the direction has been changed by vibrating briefly.
Press the UP / DOWN but-
tons at the same time
then press the STOP
button 4x
Press the UP button
(Motor vibrates)
Setting inching mode
1.
Stop the motor using the STOP button.
Activating
inching mode
2.
Press the UP and DOWN buttons on the transmitter at the same time and then press the STOP button six times.
3.
Now press the DOWN button within 5 seconds. A brief vibration of the motor confirms that the inching mode is activated.
Press the UP / DOWN but-
tons at the same time
then press the STOP
button 6x
Press the DOWN
button
(Motor vibrates)
The motor will now operate as long as you press the UP or DOWN button. In inching mode, press the UP or DOWN button for 3 seconds. The
motor moves to the end point or until you press the STOP button.
Please note, timer control will not function while inching mode is set!
1.
Stop the motor using the STOP button.
De-activating
inching mode
2.
Press the UP and DOWN buttons on the transmitter at the same time and then press the STOP button six times.
3.
Now press the DOWN button within 5 seconds. A brief vibration of the motor confirms that the inching mode is deactivated.
Press the UP / DOWN but-
tons at the same time
then press the STOP
button 6x
Press the DOWN
button
(Motor vibrates)
