JARLTECH 8034, Operation Manual

Page: 39 / 48

3 9
A
Code Table Selection
Connect the 9-pin female RS232 connector (DB9F with
DC jack) to the male equivalent (DB9M) RS232 port
on your computer or terminal. Provide power to the DC
jack on the DB9F connector using either a cable
connection to the +12V DC power plate or an external
adapter.
Step 3: Connect 8034 to your computer
The Switch Setting
Step 1: Turn off your computer
If you have not already done so, turn off your computer
to avoid any accidental damage to the pole display and
computer.
Step 2: Decide on the desired fonts
Please refer to the tables listed on Appendix IV to
decide which table is the one you are going to work on
the 8034. Adjust the switch 3, 4, 5, 6 (see Appendix I:
Specifications) for the correlative table.
This chapter introduce you how to define/setup the font
table on the 8034 either through switch 3, 4, 5, 6 setting
or EEPROM programming.
Appendix III
• • • • • • •