JARLTECH 8034, Operation Manual, Page: 30 / 48

3 0
C O M M A N D S F U N C T I O N D E S C R I P T I O N
Execute a pro-
grammed function
block
Code: 027,035
To select to print
out the data from
display.
To select to print
out the data from
printer.
This function allows the
programmer to call one
of the function blocks
for execution.
If you send<ESC>
<_> <D> <Hello>
then the pole display
will display “Hello”.
If you send <ESC>
<_> <P> <Hello>
then the printer will
print out “Hello”.
ESC #
ESC_D
ESC_P
D&P must be capital initial.
Before you send commands, please make sure that you have
already connected printer to 8034. Otherwise you send
<ESC> <_> <P> <Hello> that will make your 8034 data
buffer full, but after you connect printer to 8034 it will work
normally.
N O T E :
Programming Commands
PARAMETER FORMAT :
ESC # <BLOCK-NO>
RANGES :
BLOCK-NO : 0 - 31 (048 - 079)
EXAMPLE : Starts the Block-NO, that has been defined
in the example above.
PRINT #1, CHR$(27)+“#0”