JARLTECH 8010T, Operation Manual, Page: 22 / 52

22
Custom Programming
• USE ALT SEQUENCE FOR LOWER CTRL CHARACTERS
enables the numeric keypad ALT sequence only for
Decimal 1 through 26. If disabled, then all data from
Decimal 1 through 26 will be sent as [CRTL+A] through
[CTRL+Z] unless special assignments are made below for
[BACKSPACE], [TAB] and [ENTER] keys.
• USE ALT SEQUENCE FOR UPPER CTRL CHARACTERS
enables the numeric keypad ALT sequence only for
Decimal 28 through 31.
• SHIFT/CTRL & ALT PREFERENCES enable the use of the
right and left [SHIFT+], [CTRL+] and [ALT+] keys in the
ASCII data.
• USE ALT SEQUENCE FOR DELETE or ESCAPE enable the
use of the ALT sequence for the [DELETE] and [ESCAPE]
keys, i.e. [ALT+1+2+7] and [ALT+0+2+7] respectively.
• ENTER/TAB & BACKSPACE PREFERENCES enable:
• the [ENTER] key for carriage return (DEC 13) rather than
[CTRL+M].
• the [TAB] key for tab (DEC 9) rather than [CTRL+I].
• the [BACKSPACE] key for backspace (DEC 8) rather than
[CTRL+H].
• KEYPAD ENTER,-,+,* and / enable the conversion of these
keys as numeric keypad entries rather than main keyboard
keystrokes.