19
Custom Programming Tool
This section describes for programming tool of
1260USB magnetic stripe reader to match the
specific requirements of your application
environment.
Use the utility: JC1260U.EXE to define the
specific parameters for your reader and program
it directly under 1260USB programming tool
Step 1: Install programming tool to hard disk
Execute setup.exe from folder “Programming
tool”; the install shield will help you to complete
installation.
Step 2: Connect USB reader to the computer
or terminal
See the previous section in this manual.
(Figure 2-1)
Step 3: Execute JC1260U.EXE under
windows environment
