12
Figure 2-5
•
Note:
If you are going to
programming
1260USB
or you would like to
change
interface to RS232
, you must close card
manager utility; otherwise, the 1260USB
will keep with keyboard interface as it is
default setting and you could not
run “1260USB programming tool” when
you are running with keyboard
interface. .
Step 5: Setting for programming tool
The 1260USB is an advanced
programmable magnetic stripe reader. It
can be programmed to change many
internal parameters to meet some specific
or security concerned application. Do the
following steps, if you would like to make
