![background image](http://html2.mh-extra.com/html/jarltech/1210-series/1210-series_operation-manual_3375062022.webp)
22
that the magnetic stripe is facing the
magnetic head of the card reader.
Model 1210/1220R will beep to
indicate a successful read. The card
data will display on the screen in the
format which was programmed into
the card reader.
Testing and Troubleshooting
On 1210/1220K keyboard wedge
version: Be sure that the dip-
switch setting corresponds with
the type of keyboard. Try
adjusting the inter-character delay,
perhaps your computer keyboard
interface is not 100% IBM AT
compatible.
On 1210/1220R RS232 version:
check the RS232 parameter
settings (baud rate, parity, etc.).
Be sure that it matches the
requirements of your application
system.
Check the magnetic stripe on the
card. Is it in good condition?
Adjust the speed with which you
swipe the card through the reader
so that it is not too fast nor too
slow.
Card reader
does not
transmit the
correct data
Card reader
does not
transmit any
data
Solution
Situation
Troubleshooting Series 1210/1220