StealthOne Initial Startup
After you have installed both the Valentine One
®
and StealthOne, you must
configure the StealthOne for your car model. When you first apply power to
StealthOne it will enter setup mode and ask you to select your car model. Follow
the directions below to activate your StealthOne.
To activate your StealthOne:
1.
Turn the ignition key until power is applied to the Valentine One
®
and
StealthOne. You will notice that the Valentine One
®
display is now dark,
indicating that it is in stealth mode.
2.
Before you continue you must turn off the radio. The Forward
and the
Reverse
buttons on the steering wheel are used to configure the
StealthOne Settings, therefore leaving the radio on may interfere with the
StealthOne setup.
3.
After approximately 10 seconds after power is turned on, StealthOne will enter
setup mode:
Followed by:
4.
Using the steering wheel press the Forward
button to select your BMW
model: E46 - 3 Series, E85 - Z4, E39 - 5 Series, or E53 - X5
Tip:
Forward button is used to change the value of a setup option. The
Reverse
button is used to move to the next option.
5.
Once you have selected the correct BMW model, press the Reverse
once
so that “Exit >>>” is displayed:
6.
Press the Forward
button to exit setup mode.
7.
The StealthOne is now configured for your car.
StealthOne Owner’s Manual
7