Thank you for purchasing this quality product. Be sure to check all packing material carefully
for small parts, which may have come loose inside the carton during shipment. Identify and
count all parts and compare with the parts list below.
NOTE: WHEN INSERTING SCREWS TURN CLOCKWISE UNTIL TIGHT. THEN
LOOSEN 1/2-3/4 OF A TURN. AFTER CRIB IS COMPLETELY ASSEMBLED, RETURN TO
EACH SCREW AND TIGHTEN. USE WAX OR SOAP ON ALL SCREWS TO FACILITATE
ASSEMBLY.
ASSEMBLY INSTRUCTION FOR "343-8180"CRIB
DA707BC-C/NC (Cherry),DA707BC-H (Honey Pine), DA707BC-W/NW(White)
ATTACH THE RIGHT FRONT
POST (PART K2) TO THE RIGHT SIDE
FRAME (PART I2) USING 2 BOLTS
(PART A) AND WRENCH (PART G)
PROVIDED. REPEAT THIS STEP FOR
THE LEFT FRONT POST (PART K1) AND
LEFT SIDE FRAME (PART I1).
STEP 2.
STEP 1.
K1
G
A
I
1
K2
I
2
A
A
A
A
A
G
L
K1
O
K2
I
1
I
2
C
G
ATTACH THE LEFT SIDE FRAME
ASSEMBLY (I1 & K1) ONTO THE
HEADBOARD (PART L) BY USING 2
BOLTS (PART A) AND WRENCH
PROVIDED (PART G). REPEAT THIS
STEP TO ASSEMBLE THE RIGHT SIDE
ASSEMBLY (I2 & K2).
TO ATTACH THE STABILIZAING BAR
(PART O) TO THE SIDE PANELS (PARTS
I), INSERT BOLT (C) PROVIDED INTO
THE SIDE PANELS (PARTS I) AND USE
THE ALLEN WRENCH (PARTG)
PROVIDED TO LOCK THE
STABILIZAING BAR (PART O) IN PLACE.
