The crown has three
positions
Neutral position
Date-correction position
Time-setting position
Starting the watch
Crown in position . This
position enables you to re-
start the self-winding move-
ment manually by turning the
crown upwards ( ).
Important note
: Do it be-
fore each use (minimum 40
turns).
Setting the time
Pull the crown out to po-
sition
. Turn the crown
downwards ( ) to move the
hands to the required time.
For accurate time-setting,
ensure that the last adjust-
ment of the hands is made in
a clockwise direction.
After this operation, push
the crown back to position
. Turn the crown down-
wards ( ) to make sure it
turns freely.
Correcting the date
Pull the crown out to posi-
tion . Turn the crown up-
wards ( ) until the required
date.
It is indispensable to set the
watch to time before making
the date correction.
Important note
: Once the
time-setting is complete, the
date correction must not
under any circumstances be
done while the watch shows
the time between 11 pm and
4 am.
Kindly remember
: This
watch is guaranteed water-
resistant to 3 bar (30 me-
tres), provided the crown is
in position .
INSTRUCTIONS FOR USE GRANDE SECONDE DEADBEAT
Grande Seconde Morte.indd 3
23.09.15 09:33
