voltage and current (amp). A 15 Amp circuit breaker at 110/120V can take 1x 1500W
heater or 3 x 500W heaters. For a 240V circuit you can use 1x 3000W heater per 15A plug.
You can put more heaters on different plugs. If not sure, consult a qualified electrician;
14. Always switch off your heater when leaving the room or area;
15. Do not stare into the element when your heater is on. Prolonged staring at the element will
cause damage to your eyes (compared with staring into any light bulb or the sun);
16. Keep any flammable and/or combustible materials such as wooden furniture, paper,
curtains, or clothes at least 3ft away from the front of heater and 1ft from the side, top and
rear;
17.
CAUTION:
Heater can be used outside and in damp conditions, but must be sheltered from
rain, snow or any water. The Japidi Energy Infrared Halogen Heater is NOT waterproof.
INSTALLING YOUR WALL OR CEILING
MOUNTED HEATER
500W / 1500W / 3000W
1. When installing your Japidi Energy heater always keep sufficient clearing between wall,
ceiling and floor area. (See figure 1);
(Figure 1)
2. When working on installation or doing an adjustment, always make sure the on/off switch is
in off position and heater cord is unplugged from electrical circuit;
3. Use swivel bracket provided with heater and use approved screws and plugs for correct
application;
