OUR GUIDE TO INSTALLATION
INFRARED HALOGEN HEATERS
Congratulations, you are the proud owner of an outstanding, stylish and durable product to give
you many years of enjoyment.
Japidi Energy Heaters are manufactured in Canada and come with a 7 year warranty against
faulty workmanship (excluding the element and electrical connections).
Certified to:
CSA C22.2 No. 46-M1988 UPD 3, UL 2021 & UL 1278-9-06
WARNINGS!
Although Japidi Energy IR Heaters are very safe to use, read these instructions before use. Turn
power off before servicing heater or replacing any parts. All electrical work should be done
according to appropriate electrical codes.
1. Read all safety warnings and instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury;
2.
If you can’t find the answer, consult our website at
www.japidi.com
;
3. Do not expose your Japidi Energy Heater to rain or wet conditions. Water entering the
heater will increase the risk of electric shock;
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the heater;
5. When using the heater outdoors, use an extension cord suitable for outdoor use;
6. Do not cover or obstruct the heater while it is in use;
7. The electrical connections to the heater must be earthed;
8. Avoid the use of the Japidi Energy Infrared Heater by children or incapacitated persons;
9. Disconnect or unplug the unit during installation, repairs or replacement of the element;
10. Do not touch the heater body while the unit is burning. To avoid the risk of burns, always
make sure the element and the heater body is cool;
11. Do not touch the halogen element with bare hands. If the element is unintentionally
touched, remove the finger marks with a soft cloth and methylated spirits or alcohol. Failure
to do so results in permanent marks burning into the element causing premature element
failure. If you do need to hold or remove the element, always use a soft and clean cloth;
12. Do not insert any object through the front grid or opening of the heater;
13. Do not install more heaters on your electric circuit then allowed by your local electrical
regulations. Prior to installation you must check requirements with regards to available
