emPC-CX+
(
Hardware Manual
)
•
Intended use
3 - 9
Rev. 1.3
©
Janz Tec AG
3
Intended use
The emPC-CX+ is designed for computing purposes in industrial environments. It is destined to be
used indoor only.
3.1
Disposal and Recycling
Janz Tec products are manufactured to satisfy environmental protection requirements where possible.
Some of the components used are capable of being recycled. Final disposal of this product after its
service life must be accomplished in accordance with applicable country-, state-, or local-laws or -
regulations.
This product contains a lithium battery. This should be removed before disposal and be
returned separately
Don’t forget to delete all sensitive data on the product before disposal. Especially delete
all person related data.
3.1.1
EU
Janz Tec electronic products are labelled with the crossed-out trash can. This means that the products
must not
be disposed into the domestic garbage.
Used Janz Tec products have to be recycled properly. If in doubt, you can return them to Janz Tec at
your own expense. Refer to https://www.janztec.com/recycling or contact Janz Tec under
[email protected] for more instructions how and where to return the products.
3.1.2
Germany
All Janz Tec products are registered as B2B custom at the german EAR. Hence Janz Tec products
must not
be disposed to public collection points for used electronic equipment. Refer to §14 of
General Terms & Conditions of Janz Tec AG for the details regarding the mutual obligations as to the
disposal of Janz Tec products.
The Lithium battery included in the product is registered at “GRS Batterien” and can be disposed to
public collecting points for used batteries.
As stated above, used Janz Tec products can also be returned to Janz Tec at you own expense for
free-of-charge recycling.
