REX F-1-9 and REX F-3-9 – Standalone or Access Controller
3/2015
Black line
www.jantar.si
AS A STANDALONE CONTROLLER
The entire set-up procedure is carried out with the master fingerprint or
master card. You can register two master fingerprints or two master cards.
You can also register one master fingerprint and one master card.
The master fingerprints or master cards cannot be replaced or
duplicated. You cannot change any setting without them and neither
can we.
Programming with the master fingerprint or master
card
First connection to the power supply and registration of the
master fingerprints or master cards
Register master fingerprints:
Turn on the power supply (2 beeps indicate power on) and place your
fingerprint on the sensor, which you have chosen to be the master
fingerprint. After the triple beep remove the fingerprint. LEDs will begin to
flash rapidly, indicating recording fingerprint. At the end of the recording,
when the controller starts beeping rapidly, once again place the fingerprint
on the sensor. If the fingerprint is identical to the first one, controller
confirms the successful registration with a double beep and with the flashing
green LED diode. If the registration has failed the controller signals with a
longer beep. If the registration is successful repeat the process for the
second master fingerprint.
Register master cards:
Turn the power supply on (2 beeps indicate power on). One by one approach
two cards you will use as a master cards (3 beeps indicate a successful
registration). The first two cards registered become
master cards.
All the
other cards will be registered as
users (user cards)
.
If you want to register only one master fingerprint, then register the
same fingerprint twice. You can register only one master card if you
approach the same card twice. You can also register one master
fingerprint and one master card.
Usage of master fingerprint and master card
With the master fingerprint or master card you choose the programming
function. Functions can be confirmed either with user fingerprint or user
card.
Master fingerprint:
Every time you place the master fingerprint on the sensor you hear one beep
(successfully read) and a double beep (programming function). To select the
different programming functions you need to remove your master fingerprint
after the double-beep and place it again on the sensor within 2 seconds. The
number of double beeps indicates the programming function.
Master cards:
If you hold the master card in front of the controller, every 2 seconds a
double beep is heard. The number of double beeps indicates the
programming function.
PROGRAMMING FUNCTIONS WITH MASTER FINGERPRINT
OR MASTER CARD
Function
Description
1
Register or delete user fingerprints and cards
2
Pulse time/ Duration of active output or toggle mode
3
Door status switch input/ Time till pre-alarm
4
Duration of pre-alarm
5
Negate / Switch output state
6
Delete fingerprint or lost card
7
Delete fingerprint or lost card
9
Switch to Wiegand 26-bit or access controller
13
Delete all
15
Sound (off/on), alarm output (off/on), door status switch
input NC or NO, set time in minutes or seconds
16
Reset
Description of programming functions
Function 1) User fingerprints and user cards
Register or delete user fingerprints and cards. With a registered fingerprint
or card, output (O0, wire 3) for an el. strike is triggered for the time set in
the function 2. In the controller, registered fingerprints and cards are
arranged in order of their registration. Every registered fingerprint and card
is saved to its own position.
For registration or deletion of user fingerprints and cards you can use the
master fingerprint
or
card.
Register user fingerprint with master fingerprint:
Place the master fingerprint on the sensor and remove it (1 double beep).
Within a period of 10 seconds place a user fingerprint on the sensor. Remove
it after the beep. LEDs will begin to flash rapidly, indicating recording
fingerprint. At the end of the recording, when the controller starts beeping
rapidly, once again place the fingerprint on the sensor. If the fingerprint is
identical to the first one, controller confirms the successful registration with a
lit green LED and activated output. If the registration has failed the controller
signals with a longer beep. If the registration is successful, the user
fingerprint is registered and with it, the user can open output on the
controller. If you repeat the process with the same fingerprint, this
fingerprint will be deleted. Next registered fingerprint (or card) will take the
first available position on the list or position of the deleted fingerprint. If you
would like to delete the fingerprint of the user that no longer exists, you
must maintain a list of registered fingerprints and cards, arranged in order of
registrations-positions (functions 6 and 7).
Register user card with master card:
Approach the master card and remove it after 1 double beep. Within a period
of three seconds approach a user card. You can register more cards at once,
if you approach them one by one. The user card is now registered and with
it, you can open output on the controller. If the card has already been
registered, it is now deleted and its position is now empty. Next registered
card (or fingerprint) will take the first available position on the list or position
of the deleted card. When you have register/deleted all of the cards, wait
until the controller confirms it with double beep. To delete a lost user card,
you must maintain a list of registered cards and fingerprints, arranged in
order of registrations-positions (functions 6 and 7).
Function 2) Pulse time/ Duration of active output or toggle
mode
Set the duration of active output/ the time in which you can open the door or
set output to toggle mode. The time can be set in seconds or minutes.
Switching time from seconds to minutes and back, can be adjusted by using
the function 15. Toggle mode means, if a user fingerprint or card is
registered, output will remain opened (if it was closed) or closed (if it was
open) till next registration.
Set the duration of active output with master fingerprint:
Place the master fingerprint two times on the sensor and remove it (2 double
beeps). The controller will start to beep every second. Each beep indicates 1
second or 1 minute of active output. Duration of active output can be max
120 seconds or 60 minutes. When you hear the required number of beeps,
place a user fingerprint on the sensor or approach a user card for
confirmation.
Set toggle mode with master fingerprint:
Place the master fingerprint two times on the sensor and remove it (2 double
beeps). Place a user fingerprint on the sensor or approach a user card before
the first beep.
Set the duration of active output with master card:
Approach the master card and remove it after 2 double beeps. The controller
will start to beep every second. Each beep indicates 1 second or 1 minute of
active output. Duration of active output can be max. 120 seconds or 60
minutes. When you hear the required number of beeps, approach a user card
or place a user fingerprint on the sensor for confirmation.
Set toggle mode with master card:
Approach the master card and remove it after 2 double beeps. Approach a
user card or place a user fingerprint on the sensor before the first beep.
Toggle mode is selected.
Function 3) Door status switch input
Set the time till pre-alarm / time in which the door can stay open, without
triggering the pre-alarm and consequently the alarm. This function is used
when the door status switch on el. strike is connected to Input0/I0/wire 5 on
the controller. The input is normally opened (NO) by default. It can be
changed to normally closed (NC) by using the function 15. The time can be
set in seconds or minutes. Switching time from seconds to minutes and back,
can be adjusted by using the function 15.
Set the time till pre-alarm with master fingerprint:
Place the master fingerprint three times on the sensor and remove it (3
double beeps). The controller will start to beep every second. Each beep
indicates 1 second or 1 minute till pre-alarm. Duration of the time till pre-
alarm can be max 120 seconds or 60 minutes. When you hear the required
number of beeps, place a user fingerprint on the sensor or approach a user
card for confirmation.
Set the time till pre-alarm with master card:
Approach the master card and remove it after 3 double beeps. The controller
will start to beep every second. Each beep indicates 1 second or 1 minute till
pre-alarm. Duration of the time till pre-alarm can be max. 120 seconds or 60
minutes. When you hear the required number of beeps, approach a user card
or place a user fingerprint on the sensor for confirmation.
