Janssens Victorian Vi-23, Assembly Instructions Manual

Page: 2 / 40

P
RODUCT
I
NFORMATION
Dear customer
,
Thank you for buying a high-quality aluminium greenhouse.
R
EMARKS
The drawings in these instructions are for all basic models.
However , this manual should be sufficient to guide you
through the assembly of all sizes and variations of this
greenhouse. This greenhouse is designed for the cultivation
of plants/flowers. Therefore leakage, water drops and
condensation inside the greenhouse are allowed and to be
expected. The greenhouse should only be entered by
competent persons during cultivation or maintenance.
Aluminum profiles that are not painted may show black
stains, these stains are not a production error: they can be
easily removed with an aluminum cleaner available at every
good drugstore. The rubber strips have been treated with
oil/silicone to ease assembly. The greenhouse can be
mounted on a solid concrete foundation or on a solid
packed surface with concrete anchors in the corners. The
solid concrete foundation should be deep enough to get a
solid and frost-free ground. The greenhouse should be
anchored securely and the anchors should be checked
periodically. During winter it is necessary to clear the roof
of snow. The greenhouse should be built in a location
protected from strong winds. Protective gear (such as
protective gloves) should be used during the assembly in
order to avoid injuries. One should pay attention at all times
and consult the local building regulations.
A
SSEMBLY ORDER
The assembly procedure is the same for all
of
our greenhouses.
- Sort the profiles according the model.
-
Assemble the
aluminium
framing
.
- Level the
framed greenhouse
using a waterlevel.
- Secur
e
the
greenhouse
to the ground
-
Install glass
.
R
EQUIRED TOOLS
10mm
Socket
W
rench
10mm S
panner
Wrench
Water
-level
Phillips
screwdriver
Powered Drill
+
4.2mm or 11/64ths Drill Bit
S
cissors (to cut the rubber).
We reserve the right to change the construction without
prior notice!