14
Adjusting speed V
2
of the upper conveyor belt
This function is only available when a separate
upper conveyor belt is installed.
The speed V
2
of the upper conveyor belt can be
set either faster or slower relative to the speed
of the pattern roller (this can also be done during
operation).
This speed setting can be necessary to slightly
stretch or compress a cookie during forming.
Classic applications are the forming of round baked pastry cases, large cookies or
continuous bands of dough.
Especially for continuous bands of dough, having the upper conveyor belt run more
slowly can prevent the band of dough from tearing.
1) To do so, press the mode button (4) until LED (6) below lights up. Then press the
arrow button (10, 12) until the desired speed of the upper conveyor belt is shown on
the display (11). The correct value can only be determined through repeated trials.
Adjusting speed V
1
of the upper conveyor belt
This function is only available when a separate variable motor is installed.
The speed V
1
of the entire machine can be set either faster or slower (this can also be
done during operation).
This speed adjustment could be necessary to synchronise the cookie forming with
the speed of the downstream conveyor oven. Furthermore, it can be helpful in the
case of very thick pieces of dough that are not filled in completely otherwise to run the
machine more slowly.
1) To do so, press the mode button (4) until LED (5) below lights up. Then press the
arrow button (10, 12) until the desired speed of the upper conveyor belt is shown on
the display (11). The correct value can only be determined through repeated trials.
After completing work, the machine must be switched off by means of
the main switch on the side of the machine!
Pull the plug from the mains!
