- 2 -
I .
U s a g e a n d F e a t u r e
BP 600
Semi-automatic Rotary Sealing Machine has the functions of manual turn rotary
board, automatic filling/foil placing and sealing. It adopts intelligent temperature
controller, the temperature error < ± 1%, strong sealing function. It uses JAPANESE
OMRON PLC. Fuselage of Stainless steel is up to food standard. The usage of pneumatic
parts simplifies the mechanical structure., decrease the breakdown. The performance of the
machine is more stable and safe. Automatic flow filling without spray or leaking,
excellent sealing, increase the capacity and longer the machine life.
The machine can use aluminum foil or aluminum film or roll of plastic film, it is widely
used in beverage, milk and food industries.
I I .
M a i n P a r a m e t e r
Rotary speed: 10 rounds/min
Output: 600 cups/hour
Heating power consumption: l kw
Air consumption: 0.3 m
3
/min
Voltage: 220V 50HZ
Machine size: 800mm x 600mm x 800mm
Weight: 90Kg
I I I .
S t r u c t u r e a n d P r i n c i p l e
1.
Structure
Refer to Whole machine structure (FIG 1) and Sealing and Cutting Structure
The whole machine is composed of main body, automatic gravity filling system,
automatic sealing system. The cup is put manually in the cup mould on the
aluminum board, the board turned manually one station ahead, the filling piston begins
to work (filling volume can be adjusted by the cylinder valve), the sealing works at the
same time, the cup taken out manually.
Heating system: It is composed of intelligent temperature controller, heating element,
solid booster and thereto couple. The heating temperature can be adjusted between
0
-
300 .
The machine connects 220V 50HZ Single phase alternating currents, the capacity of
air
compressor must be bigger than 0.4 m
a
/h.
2.
Principle and Usage
As Pic 1 and Pic 3 shows
Turn on "power" switch, the power indicating light is on. Connect the air compressor
to
the
machine, adjust the air filter pressure to 0.65Mpa
(it
is adjusted before going out the
factory), the whole machine is on the original working condition.
Turn on Heating switch, the heating indicating light is on. Set the temperature to 150 °C,
when the temperature reaches the setting temperature, then adjust the temperature
