Janome TM30, Instruction Book, Page: 42 / 52

40
Applique
q
Stitch pattern: 18
w
Thread tension dial: 1 to 4
e
Presser foot: Satin stitch foot F
* The stitch patterns 19 to 21 can also be used.
Place an applique on the fabric and baste or pin it in place.
Lower the needle at the outer edge of the applique.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
q
Applique
w
Outer edge
When turning a sharp corner, stop the machine and
lower the needle with the needle at the outer edge of the
applique.
Raise the foot and pivot the fabric around the needle to
change the sewing direction.
• Adjusting the stitch width
Select pattern 18.
Press the mode key
e
to select the stitch width adjustment
mode ( ).
Press the “ ” sign on the value set key
r
to decrease the
stitch width
y
.
Press the “ ” sign on the value set key
r
to increase the
stitch width
u
.
e
Mode key
r
Value set key
The stitch width will be varied based on the right needle
drop position
t
.
The stitch patterns 18-20 have a fixed right needle drop
position. When you change the stitch width, the left needle
drop position will change.
y
u
t
4
w e q
r
q
w
e