16
Threading the Machine
Raise the presser foot. Press the needle up/down button
to raise the thread take-up lever to its highest position.
CAUTION:
Turn off the power switch before threading the machine.
z
Turn the power switch off. Draw the thread around the
upper thread guide.
q
Upper thread guide
x
While holding the thread near the spool, draw the
thread down along the right channel.
w
Right channel
c
Pull the thread up around the bottom of the thread
guide plate.
Pull the thread up along the left channel.
e
Thread guide plate
r
Left channel
v
Firmly draw the thread up and to the back of the
take-up lever. Draw the thread forward to pass it into
the take-up lever eye.
t
Take-up lever eye
b
Pull the thread down along the left channel and pass
the thread through the lower thread guide.
y
Lower thread guide
n
Slide the thread behind the needle bar thread guide
on the left.
u
Needle bar thread guide
m
Thread the needle from front to back, or use the
needle threader.
i
Needle
q
w
e
t
y
u
i
z
x
c
v
b
n
m
z
x
c
v
b
n
m
r
