Janome Sewing Machine Getting Started Manual Download Page 99

Page: 99 / 112

100

USB Memory Keys

The USB memory keys can be used to save the stitch

data and transfer the embroidery designs between the

MC 11000 and your PC.

The USB memory key are available from camera

shops, PC supplies stores etc. in various forms.

Insert the USB memory key into the type “A” USB port on

the MC 11000.

㻔

Edit

ATA

Built-in

㻻

USB

Card

memory

USB Memory

Embf

㻃

ROM

Location :

Open File

FLOWER

0.1/497MB

Embf

㻻

Rename

M_001

M_002

M_003

1/2

ST:126x110mm

Press the open file key and the open file window will
open.

Press the USB memory tab and the folder list will be
displayed on the screen.
Press the desired folder icon to open.

Select the desired pattern by pressing the pattern icon.

NOTE:

To insert or remove the USB memory, insert or pull it
straight.

CAUTION:

Do not turn the power off, eject the card or remove the
USB memory key while a warning message has been
displayed on the screen.
Otherwise the saved data will be lost or the memory
will be damaged.

Summary of Contents for Sewing Machine

















































































































Search results

Summary of Contents for Sewing Machine

Reviews:

Janome Sewing Machine, Getting Started Manual, Page: 99 / 112

Search results

Summary of Contents for Sewing Machine

Reviews: