AAASewing.com
103
Problems and Warning Signals
If a buzzer sounds and the LCD screen shows a warning sign, follow the guidance below.
The machine will stop if the buttonhole is sewn without
lowering the buttonhole lever.
The foot control is disconnected while sewing.
The machine is started without lowering the presser
foot.
The machine will stop if the presser foot is raised while
sewing.
The power is turned on while depressing the foot
control.
The foot control is released or the start/stop button is
pressed while sewing a locking stitch.
The power is turned on with the needle in the down
position.
The auto thread cutter button is pressed while the
machine is still initializing after turning the power on. Or,
the thread cutter button is pressed 4 times in a row.
The start/stop button is pressed with the foot control
connected.
Connect the foot control
and start the machine
again.
Disconnect the foot control.
Release the foot control.
Turn the hand wheel to
raise the needle.
Lower the presser foot and
start the machine.
Lower the presser foot and
start the machine again.
Lower the buttonhole lever
and start the machine
again.
Start the machine again
to let the machine stop
automatically.
Press the thread cutter
button after the machine
stops.
The bobbin winder spindle is shifted to the right.
Shift the bobbin winder
spindle to the left for
stitching.
The twin needle button is pressed when a pattern
unsuitable for twin needle sewing has been selected.
Select the pattern suitable
for twin needle sewing.
Warning Sign
Cause
Try this
Janome MC8900 Instruction Manual
Janome Quilting & Sewing Machine
www.aaasewing.com
MC8900 Owners Manual/ User Guide
