www.toews.com
63
The machine is started when it halts due to the
overload.
The feed dog is lowered while sewing.
The bobbin winder spindle is locked while winding a
bobbin.
Wait for at least 15 seconds to
start.
Do not lower or raise the feed dog
while the machine is running.
Turn off the power and remove
tangled threads.
The machine is out of order due to a problem in the
control circuit.
Contact the service center or the
store from whom the machine
was purchased.
The foot control is disconnected while sewing.
The power is turned on while depressing the foot control.
Connect the foot control and start
the machine.
Release the foot control.
The machine is started without lowering the presser
foot.
The thread cutter button is pressed with the presser
foot raised.
The machine will stop if the presser foot is raised
while sewing locking stitches.
Lower the presser foot and start
the machine.
Lower the presser foot and press
the thread cutter button again.
Raise the presser foot after locking
stitches are completely finished.
The machine will stop if the buttonhole is sewn
without lowering the buttonhole lever.
Lower the buttonhole lever and
start the machine.
Problems and Warning Signals
If a buzzer sounds and the LCD screen shows a warning sign, follow the guidance below.
Warning Sign
Cause
Try this
The bobbin winding button is pressed without
pushing the bobbin winder stopper to the left.
Push the bobbin winder stopper to
the left and press the bobbin
winding button.
Sew the basting stitch without lowering the feed dog.
The machine is started with the feed dog lowered.
Lower the feed dog and sew
basting stitch.
Raise the feed dog and start the
macine.
If a stitch for free hand quilting
has been selected, the warning
sign will disappear after a while.
to
Janome MC6300 Instruction Manual
Janome Professional Sewing Machine
www.toews.com
MC6300 Owners Manual/ User Guide