www.toews.com
13
Inserting the bobbin
z
Place the bobbin in the bobbin holder with the
thread running off counterclockwise.
1 Thread
2 Bobbin Holder
x
Guide the thread into notch (A) on the front of the
bobbin holder.
c
Draw the thread to the left, sliding it between the
tension spring blades.
v
Continue to draw the thread lightly until the thread
slips into side notch (B). The bobbin should turn
counterclockwise when pulling the bobbin thread. If
not, reverse the bobbin and re-thread.
b
Pull out about 10 cm (4") of thread to the rear.
Refer to the threading chart shown on the hook
cover plate.
Reattach the hook cover plate.
3 Threading Chart
3
(B)
(A)
1
2
z
x
c
v
b
Janome MC6300 Instruction Manual
Janome Professional Sewing Machine
www.toews.com
MC6300 Owners Manual/ User Guide