27
MC 9500
SET
Main
Slave
DC1
Solenoid
OK
Key
Adjusting Solenoid
To adjust:
1. Remove the top cover. (See page 1)
2. Loosen Screws (2 pieces).
3. Slide the Solenoid to the right most position.
4. Tighten Screws .
Screw
Solenoid
Tension disc
Tension disc holder
Plunger
Slide to the right
1
1
2
1
2
3
4
5
1
3
5
4
5 To check tension release function
a. Lower the presser bar.
Turn the power switch “ON” while pressing the Start/
Stop button. Touch panel indicates the Self Check
function keys as shown.
b. Press “Solenoid “ key on the touch panel and it will
indicate Solenoid “Key”.
c. Press the Solenoid “Key” several times to check if the
Tension disc and Tension disc holder open
when the solenoid is activated.
d. Press “ OK “ key.
e. Turn the power “OFF”.
f. Attach the top cover.
2
6
6
3
4
www.promelectroavtomat.ru
