12
Threading the Machine
Raise the presser foot. Press the needle up/down
button twice to raise the needle.
Turn the power switch off.
1
Draw the thread from the spool. Hold the thread with
both hands and pass the thread under the thread
guide plate. Tug the thread until it snaps.
2
Draw the thread down along the right channel and
around the bottom of the guide plate.
3
Pull the thread up along the left channel to the
thread take-up lever.
4
Firmly draw the thread up to the take-up lever and
down into its eye from the right to the left, while
holding the thread at the spool.
5
Then pull the thread down along the left channel
and through the lower thread guide.
6
Slide the thread behind the needle bar thread guide
on the left.
7
Thread the needle with the automatic needle
threader (refer to the next page).
1
2
3
4
5
6
7
