AAASewing.com
56
Darning
Machine setting
q
Pattern
w
LED display
e
Foot
R: Automatic buttonhole foot
z
Pull the button holder fully to the back.
x
Draw the needle thread to the left through the hole
on the foot.
c
Lower the needle into the fabric where start to sew.
Lower the foot and depress the foot control.
The machine will darn and stop automatically. The
LED display will show a blinking dot when the
darning is finished.
NOTE:
The maximum length and width of the darning are
2 cm and 0.7cm respectively.
Sew another layer of darning over the previous one, at
the right angle.
q
Button holder
w
Starting point
e
Maximum length (2cm)
r
Maximum width (0.7cm)
t
Blinking dot
q
w
e
z x c
q
w
e
r
v
a
a
a
a
a
y
u
s
s
s
s
s
(A)
(B)
s
s
s
s
s
Adjusting the evenness of the darning
(A) If the left corner is lower than the right side,
press the Up (+) key to correct it.
(B) If the right corner is lower than the left side,
press the Down (–) key to correct it.
NOTE:
Allowable adjustment range is d1-d9.
Default setting is “d5”.
a
a
a
a
a
To sew a shorter darning
Sew the first row to the required length and press
the reverse stitch button. Continue to sew the
remaining stitches until the machine stops
automatically.
y
Reverse stitch button
u
Required length
t
Janome 7360 Instruction Manual
Magnolia 7360 Sewing Machine
www.aaasewing.com
7360 Owners Manual/ User Guide
