13
Adjusting Feed Dog Height
<To adjust>
Select the straight stitch ( ) and set the stitch width at "4".
Lower the presser foot. Turn the handwheel to bring the feed dog to its heighest position.
Remove the base cover (see page 2).
Loosen the setscrew (A) and nut.
Turn the adjusting screw to set the feed dog height to 0.75 to 0.85 mm.
Tighten the nut and setscrew (A).
Attach the base cover.
Presser foot
0.75 to 0.85mm
Needle plate
Feed dog
To raise
To lower
Adjusting screw
Nut
Setscrew (A)
• The standard height of the feed dog should be 0.75-0.85 mm above the needle plate
when the feed dog is at its highest position.
