4
q
t
e
r
u
y
w
i
e
t
r
w
q
For the U.S.A. and Canada only
Polarized plug (one blade wider than the other):
To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If it does not fit
fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.
SECTION II. GETTING READY TO SEW
Connecting the Power Supply
• Using the foot control
Turn off the power switch
q
.
Insert the foot control plug
w
into the foot control jack
e
.
Insert the machine plug
r
into the power inlet
t
.
Insert the power supply plug
y
into the wall outlet
u
.
Turn on the power switch
q
.
The foot control sign
i
will be displayed when the foot
control is connected to the machine.
q
Power switch
w
Foot control plug
e
Foot control jack
r
Machine plug
t
Power inlet
y
Power supply plug
u
Wall outlet
i
Foot control sign
• Using the start/stop button
Turn off the power switch
q
.
Insert the machine plug
w
into the power inlet
e
.
Insert the power supply plug
r
into the wall outlet
t
.
Turn on the power switch
q
.
q
Power switch
w
Machine plug
e
Power inlet
r
Power supply plug
t
Wall outlet
NOTE:
The start/stop button does not work when the foot
control is connected.
WARNING:
While in operation, always keep your eyes on the
sewing area and do not touch any moving parts such
as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug from the
power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control, otherwise
the machine will run inadvertently.
Operating Instructions:
The symbol “O” on a switch indicates the “off” position of
the switch.
