Janome 5300QDC, Instruction Book

Page: 64 / 84

62
Programming Auto-thread Cutting
Example: Auto-thread Cutting with Patterns 73 and
82 (mode 3)
z
Refer to procedure
z
to
b
on “Pattern Combination”
on page 61 to enter the stitch patterns 73 and 82 in
mode 3.
x
Press and hold the thread cutter button until the
thread cutter mark appears on the LCD display.
q
Thread cutter button
w
Thread cutter mark
c
6WDUWVHZLQJ$SDWWHUQFRPELQDWLRQVHULHVZLOO
be sewn and the machine will trim the threads
automatically after locking stitch.
z x c
q
Programming the Auto-lock Stitch
Example: Pattern 70 (mode 3)
z
6HOHFWSDWWHUQLQPRGH
Press the memory key.
x
Press the mode key.
6HOHFWSDWWHUQLQPRGH
Press the memory key.
c
Place the fabric and sew.
The machine will sew a locking stitch
q
, stitch pattern
70, locking stitch
w
and stop.
q
Initial locking stitch
w
End locking stitch
z
x
c
q
w
NOTE:
The locking stitch at the beginning
q
is
pre-programmed.
w