JanomeFlyer.com
37
• Adjusting the stitch density
Press the stitch length adjustment key to
change the stitch density.
Press the “–” button to make the buttonhole stitch
denser
q
.
Press the “+” button to make the buttonhole stitch less
dense
w
.
The stitch density can be varied from 0.3 to 0.8
depending on the selected buttonhole.
The default setting is “0.4”.
• Adjusting the stitch width
Press the stitch width adjustment key to
change the stitch.
Press the “–” button to decrease buttonhole width
q
.
Press the “+” button to increase buttonhole width
w
.
The stitch width can be varied from 2.5 to 7.0
depending on the selected buttonhole.
The default setting is “5.0”.
Adjusting the Stitch Width and Density for
Buttonholes
q
w
q
w
Round-End Buttonhole
q
Stitch pattern:
MODE 2:
22
w
Thread tension dial: 1 to 5
e
Presser foot:
Automatic buttonhole foot R
q
e
w
q
e
w
Fine Fabric Buttonhole
q
Stitch pattern:
MODE 2:
23
w
Thread tension dial: 1 to 5
e
Presser foot:
Automatic buttonhole foot R
The sewing procedure is the same as the square
The sewing procedure is the same as the square
buttonhole. The stitch width can be varied from 2.5 to 5.5.
To change the stitch width or stitch density, refer to the
section above.
buttonhole. The stitch width can be varied from 2.5 to 5.5.
To change the stitch width or density, refer to the section
above.
Janome 4120QDC Sewing Machine Instruction Manual
www.janomeflyer.com
4120QDC Owners Manual/ User Guide
