JanomeFlyer.com
31
q
e
w
Blind Hemming
q
Stitch pattern:
MODE 1:
0
MODE 2:
10 or 15
w
Thread tension dial: 1 to 4
e
Presser foot:
Blind hem foot G
z
Fold a hem with the wrong side of the fabric up to
form a 1/4˝ – 7/16˝ (0.4 – 0.7 cm) allowance.
q
Wrong side of fabric
w
1/4˝ – 7/16˝ (0.4 – 0.7 cm)
(1) On heavyweight fabrics that tend to ravel, the raw
edge should be overcast first.
(2) Fold the hem under the fabric for lightweight
fabrics.
q
w
(2)
x
Place the fabric so that the fold is next to the guide on
the foot. Lower the presser foot. Adjust the needle
drop position if necessary. Sew while guiding the fold
along the guide.
e
Fold
r
Guide
z
q
w
(1)
x
c
c
Open the fabric after sewing is finished.
NOTE:
If the needle pierces too far left, the stitch will show
through on the right side of the fabric.
e
r
(1)
(2)
• Adjusting the needle drop position
Press the stitch width adjusting key
to move
the change the needle drop position.
(1) Press “–” to move the needle drop position to the
right.
(2) Press “+” to move the needle drop position to the
left.
The LCD display shows the distance between the
guide and left needle drop position in millimeters.
The needle drop position can be varied from 0.0 to 1.2.
The value indicates the distance between the left
needle position and the guide.
q
Left needle drop position
w
Guide
NOTE:
The needle drop position can be varied, but the stitch
width will remain the same.
q
w
Janome 4120QDC Sewing Machine Instruction Manual
www.janomeflyer.com
4120QDC Owners Manual/ User Guide
