www.toews.com
28
Threading the Machine
The machine is pre-threaded to make threading
easier.
Tie the end of a new thread to one of the pre-set
threads, and pull it to draw the new thread through
the machine, following the steps below.
1. Turn off the power switch before threading the
machine.
2. Pull the threads from the spools and draw them
through the thread guides, then tie the thread
ends together.
3. Raise the presser foot, draw the threads until the
knots are coming out from under the back of the
presser foot.
4. However, stop drawing the needle threads when
the knots reach just before the needle eye.
Cut the knots and thread the needle eye.
5. Before starting sewing, clear the needle threads
from under the presser foot to make sure they are
not caught below the needle plate.
Then pull out the threads to the back approxi-
mately 10 cm (4˝) away from the presser foot.
Lower the presser foot, and you are now ready to
sew.
• For re-threading the machine easily, start from the
lower looper, upper looper, right needle and left
needle threads.
Make sure to clear the needle threads out from
below the needle plate and draw them to the
back and under the presser foot about 10 cm (4˝).
Lower looper thread
Upper looper thread
Right needle thread
Left needle thread
Thread guide
Thread guide plate
Thread chart
• If one of the threads is broken, follow the
re-threading procedure as follows:
1. Raise the presser foot and pull the thread chain
out to the back of the presser foot, and cut the
chain to separate each of the threads.
2. Rethread the thread which had been broken.
3. Turn the handwheel toward you until the needle
comes to its highest position.
4. Pull the threads from under the presser foot with
tweezers and pull out the needle threads above
the needle plate. Draw out 10 cm (4˝) away from
the presser foot. (Draw the needle thread in the
direction of A)
Needle
Needle thread
Needle plate
7
6
1
2
3
4
5
1
2
3
4
3
2
5
1
6
7
A
1
2
3
Janome 3434D Instruction Manual
Janome Serger 3434D
www.toews.com
3434D Owners Manual/ User Guide
