www.toews.com
18
Adjustment of Foot Pressure
It is not necessary to adjust the presser foot’s
pressure for normal sewing.
When you sew heavy or lightweight fabrics, turn the
adjusting screw:
– clockwise for heavyweight fabric.
– counterclockwise for Iightweight fabric.
*
For normal sewing, set the adjusting screw so
that its head comes out above the top of the
machine by 2 mm.
See the illustration.
To decrease
To increase
Adjusting screw
Top of the machine
Removing the Presser Foot
1. Turn off the power switch and unplug the
machine.
2. Raise the needle and the presser foot.
3. Press the lever located on the back of the foot
holder. The presser foot will drop off.
Needle
Presser foot lifter
Foot holder
Lever
Attaching the Presser Foot
1. Turn off the power switch and unplug the
machine.
2. Place the presser foot so that the pin on the foot
lies just under the groove of the foot holder.
3. Lower the foot holder to lock the foot into place.
4. Raise the presser foot lifter to check that the
presser foot is secure.
Groove
Pin
Lever
1
2
3
4
1
2
3
1
2
3
4
1 mm
2
1
4
3
3
1
2
2
3
1
2
4
Janome 3434D Instruction Manual
Janome Serger 3434D
www.toews.com
3434D Owners Manual/ User Guide
