23
MECHANICAL ADJUSTMENT
BARTACK FEED OF BUTTONHOLE (2049, 2041)
TO CHECK:
IF THE MATERIAL IS FED FORWARD OR BACKWARD WHEN SEWING A BARTACK ON
BUTTONHOLE, MAKE THE FOLLOWING ADJUSTMENT:
ADJUSTMENT PROCEDURE:
1.
SET THE PATTERN SELECTOR DIAL AT “ ” AND THE STITCH LENGTH DIAL AT
“ 4 ”.
2.
REMOVE THE FRONT COVER. (SEE PAGE 9.)
3.
PLACE A PIECE OF PAPER UNDER THE FOOT, AND TURN THE HANDWHEEL.
IF THE PAPER IS FED FORWARD, TURN THE ADJUSTING SCREW IN THE
DIRECTION OF (C).
IF THE PAPER IS FED BACKWARD, TURN THE ADJUSTING SCREW IN THE
DIRECTION OF (D).
4.
MOUNT THE FRONT COVER.
FORWARD FEEDING
BACKWARD FEEDING
(D)
(C)
ADJUSTING SCREW
STITCH LENGTH DIAL
