janitza UMG507, Functional Description

Page: 2 / 24

2
Generals
The UMG507 supports the protocols Modbus RTU, Modbus TCP/IP, Modbus over TCP/IP (Modbus Gateway) or
Profibus DP V0, depending in the version. This functional description is an addition to the manual and describes the
configuration of the corresponding function step by step.
More functional descriptions can be found on the CD-ROM PSWbasic/professional. At present, the following functional
descriptions are available:
- UMG507 used as remote data display for external Modbus slaves
- OPC Server Port 502
- OPC Server Port 8000 (Modbus Gateway Function)
- The webserver of UMG507
- Description of the storage of UMG507
- Description of Profibus with examples
Issue Note:
17.02.2005
First edition / Wagner
07.03.2005 Correction
All rights reserved. No part of this description may be reproduced or multiplied without the expressed written permmission
of the author.
Any contraventions are punishable and will be prosecuted with all legal means.
No liability can be taken for the faultless condition of the manual or damage caused by the use of it. As failures
cannot be avoided completely, we shall be very grateful for any advice. We will try to remove any failures as soon
as possible. The mentioned software and hardware descriptions are registered trademarks in the most cases and
are subjected to the regulations by law. All registered trademarks are property of the corresponding companies
and are fully recognized by us.