background image

CONGRATULATIONS ON CHOOSING
A BABY LOCK SEWING MACHINE

Your machine is one of the finest sewing machines available for home use.
To fully enjoy all the features incorporated into it, we suggest that you study this booklet.

PLEASE READ BEFORE USING YOUR SEWING MACHINE

For safe operation

Be sure to watch the placement of your hands in relation to the needle while sewing. Do not touch moving parts such as the balance wheel, thread take-up or needle
while the machine is operating.

Remember to turn off the power switch and unplug the cord when:

Operation is completed

Replacing or removing the needle or any other parts

A power failure occurs during use

Maintaining the machine

Leaving the machine unattended

Do not place anything on the foot controller.

Plug the machine directly into the wall outlet. Do not use extension cords.

For a longer service life

When storing your sewing machine, avoid direct sunlight and high humidity locations. Do not store the sewing machine beside a space heater, iron, or other hot
objects.

Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders can damage the case and machine, and should never be used.

Do not drop or hit the machine.

Always consult the operation manual when replacing any accessories, including: the presser feet, needle or other parts to assure correct installation.

For repair or adjustment

In the event that a malfunction occurs or adjustment is required, first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine
yourself. If the problem persists, please consult your nearest authorized Baby Lock service center.
For additional product information and update, or to find your nearest Baby Lock dealer, visit our website at www.babylock.com

Summary of Contents for Baby Lock A-LINE Series










Reviews: