Page 6
Table 3. Dimensions for Jandy
TM
SF-T Filters
Model #
A
B
C D E F
SF28-T
39½"
30¼"
29" 2" 2" 4½"
SF30-T
47"
37¼"
31" 2½" 2½" 5½"
SF32-T
45¾"
34½"
33" 2½" 2½" 5½"
SF36-T
47¼"
38½"
37" 2½" 2½" 5½"
Figure 2. Dimensions, SF-T Series
A
B
C
2E. Dimensions
Table 4. Dimensions for Jandy
TM
SF-S Filters
Model #
A
B
C
D
E
SF24-S
32½"
34"
24¾"
23½"
21¼"
SF30-S
37¼"
43¼"
30½"
26¾"
23½"
SF36-S
43"
49½"
36¾"
29¼"
26"
Note
: The waste outlet is the same height as the return
outlet.
Figure 3. Dimensions, SF-S Series
A
B
C
D
E
SECTION 3.
Installation Instructions
3A. Filter Preparation
1.
Check carton for any damage due to rough
handling in shipment. If carton or any filter
components are damaged, notify carrier
immediately.
2.
Carefully remove the accessory package and the
filter tank from the carton.
3.
A visual inspection of all parts should be made
now.
4.
Mount the pressure gauge to the top of the filter.
Note:
On top mount filters, the pressure gauge
mounts into the MPV.
5.
Install the pressure release valve to the top of the
filter.
Note:
On top mount filters, the pressure
relief knob mounts into the MPV.
D
F
E
INLET
OUTLET
Figure 1. Dimensions, ST-T Series
A
B
C
2.06"
2.06"
4.44"
Table 2. Dimensions for Jandy
TM
ST-T Filters
Model #
A
B
C
ST20-T
33½"
23½"
21¾"
ST24-T
33½"
23½"
25¾"
MAX. OPERATING
PRESSURE
IS 35 PSI