- 0 -
Z77A-ProX User's Manual
4.5.7 Security
• Administrator Password
This option is used to set an administrator password, as the following steps:
1. Move the cursor to the Administrator Password item, press <Enter>.
2. In the "Create New Password" dialog box, enter
3 to 20 characters or numbers
to be
set, press <Enter>, and enter again in the "Confirm Password" dialog box to confirm
the password.
If the password is correct, the system will prompt "Password Installed ", the password is set
successfully. If the prompt" Invalid Password! ", the passwords do not match, please
re-enter again.
To clear the system administrator password, select "Administrator Password", in "Enter
Current Password" dialog box enter the old password, and in the "Create New Password"
press <Enter>, password will be cleared.
• User Password
The option is to set the user password, setting steps are the same as setting the
"Administrator Password"
.
Security\
Main
Advanced
Chipset
Boot
Security
Password Description
If ONLY the Administrator'password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
isa power on password and must be entered to
boot or enter Setup. In Setup the User will
have Admimistrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
User Password
Password Check Setup
OverClock
→ ←
:Select Screen
↑↓
/Click
:
Select Item
Enter/Dbl Click: Select
+/-:Change Opt.
F1 :General Help
F7 :Previous Values
F8 :Fail-Safe Values
F9 :Optimized Defaults
F10:Save&Exit
ESC:Exit
Version 2.14.1219.Copyright (C) 2011 American Megatrends,Inc.
S e t A d m i n i s t r a t o r
Password
Administrator Password
