- 2 -
Z77A-ProX User's Manual
Press < ESC> key to return to the Advanced menu
• PWROn After PWR-Fail
Setting the system power state after a powre failure. Setting "Alway Off", need to press
the case power button to boot again. Setting "Alway On", the system will power up itself
when the power is back. Setting to "Keep Last State", the system will resume its last state
before the power loss.
The default value is "Alway Off".
• PS/2 keyboard Poweron
When setting "Password Key specific", system can wake up with Password. When setting
"Any Key specific", system can wake up with any key of a keyboard. When setting
"Disabled", system can't be waken up by keyboard.
Note: If you set the password boot functions, the mainboard boot button will failure
.
• Wakeup By PME
Network control of awakening. Options: Enabled, Disabled.
• Poweron By RTC
Setting boot waking up time(day,hr:min:sec). optional for Disabled,Enabled.
Note:
Don’t forget your password. If you forget the password, you will have to
open the computer case and clear all information in the CMOS before you can start
up the system. But by doing this, you will have to reset all previously set options.
►
Advanced Power Management
Advanced\Advanced Power Management ration\
Main
Advanced
Chipset
Boot
Security
APM Configuration
PS/2 Keyboard Poweron
Wakeup By PME
Poweron By RTC
OverClock
→ ←
:Select Screen
↑↓
/Click
:
Select Item
Enter/Dbl Click: Select
+/-:Change Opt.
F1 :General Help
F7 :Previous Values
F8 :Fail-Safe Values
F9 :Optimized Defaults
F10:Save&Exit
ESC:Exit
Version 2.14.1219.Copyright (C) 2011 American Megatrends,Inc.
PWROn After PWR-Fail
PWROn After PWR-Fail
Alway...
Disabled
Disabled
Disabled
