J&W nVIDIA MCP78 Series, User Manual

Page: 27 / 44

- 2 -
nVIDIA MCP78 Series User's Manual
•
OnChip SATA Controller
Enables or disables the integrated SATA controller.
• SATA Mode select
Configures the SATA controllers to SATA mode(Default).
•
Onboard Floppy Controller
Use this item to enable or disable floppy drive controller.
• Serial Port1 Address
Allows you to select the Serial Port1 base address.
•
Serial Port2 Address
Allows you to select the Serial Port2 base address.
• Serial Port2 Mode
The field allows you to specify the operation mode for serial port2.
• IR I/O Pin Select
Consult your IR peripheral documentation to select the correct setting of the TxD and RxD
signals.
•
IR Duplex Mode
This item allows you to select the IR half.full duplex function.
►
HDMI/DVI
This option allows you to set AUTO or HDMI states in BIOS.
• POST LED GPO
Available options are [SB'GPO1,4(Normal)] and [SB'GPO1,4(Invert)].
Default value is [SB'GPO1,4(Normal)].
►
PCIPnP
Click <Enter> key to enter its submenu.
BIOS SETUP UTILITY
Advanced
Advanced PCI/PnP Settings Clear NVRAM during
System Boot.
←
Select Screen
↑ ↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Clear NVRAM
Plug & Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
OffBoard PCI/ISA IDE Card
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ14
IRQ15
DMA Channel 0
DMA Channel 1
DMA Channel 3
DMA Channel 5
DMA Channel 6
DMA Channel 7
Reserved Memory Size
[No]
[No]
[32]
[Yes]
[Disabled]
[Enabled]
[Auto]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Disabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.