J&W nVIDIA MCP78 Series, User Manual

Page: 24 / 44

- 2 -
nVIDIA MCP78 Series User's Manual
BIOS SETUP UTILITY
Main Advanced Boot Security Power JUSTw00T! Exit
System Overview
←
Select Screen
↑ ↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
►
System Information
System Time
System Date
Floppy A
Language [21:50:32]
[Mon 04/21/2008]
[Disabled]
[English]
►
Primary IDE Master
►
Primary IDE Slave
►
SATA Port1
►
SATA Port3
►
SATA Port2
►
SATA Port4
►
USB Device
: [Not Detected]
: [Not Detected]
: [Hard Disk]
: [Not Detected]
: [Not Detected]
: [Not Detected]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
4.5.3 Main Setting
This is the System Overview, The System Time, System Date, Primary IDE information,
SATA port information and USB Device.
► System Information
Please Enter this submenu, this will be display BIOS verison, build date, ID number, also will
display CPU type, Speed, count, and Memory Size and so on.
• System time
This item sets the time you specify(usually the current time)in the format of [Hour],[Minute]and
[Second].
• System date
This item sets the date you specify(usually the current date0in the format of [Month],[Date],
and [Year].
• Floppy A
Allows you to selects the type of floppy disk drive installed in your system. If you do not
install a floppy disk drive, set this item to None. Options are: None, 360K/5.25", 1.2M/5.25",
720K/3.5",1.44M/3.5", 2.88M/3.5".
• Language
Allows you to selects the current default language used by the BIOS.
►
Primary ide Master /Slave
This item sets the status of auto detection of IDE devices while enterting setup, and BIOS will
auto detects the presence of IDE devices.
►
SATA Port 1 /3/2/4
This item sets the status of auto detection of SATA devices while enterting setup, and BIOS
will auto detects the presence of SATA devices.
► USB Device(USB Devices Setting)
• Legacy USB Support
Enabled or Disabled Legacy USB option, and Auto option disables legacy support if no USB
devices are connected.
• USB 2.0 Controller Mode
Allow you to selects the HiSpeed(480Mbps) or FullSpeed(12Mbps).
• BIOS EHCI Hand-Off
This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change
should claim by EHCI driver.