J&W JW-D525M-GT, User Manual, Page: 20 / 28

- 1 -
JW-D525M-GT User's Manual
►
Onboard Device Configuration
Click <Enter> key to enter its submenu.
BIOS SETUP UTILITY
Advanced
Onboard Device Configuration Options
Disabled
Enabled
←
Select Screen
↑ ↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
USB Functions
USB 2.0 Controller
HDA Controller
Onboard Lan
LAN BootRom
Serial Port1 Address
Serial Port2 Address
Serial Port2 Mode
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
Configure SATA as
SATA Run Mode Configuration
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[3F8/IRQ4]
[2F8/IRQ3]
[Normal]
[378]
[Normal]
[IRQ7]
[IDE]
[Compatible]
v02.68 (C)Copyright 1985-2009, American Megatrends, Inc.
• USB Function
Allows you to enable or disable the USB Host Controllers.
• USB 2.0 Controller
Allows you to enable or disable the USB 2.0 controller.
• HDA Controller
This setting is used to enable or disable the onboard audio controller.
• Onboard Lan
Allows you to enable or disable the onboard Lan controller.
•
Lan BootRom
This item allows you to use the boot ROM to boot-up the system and access the local area
network directly.
• Serial Port1 Address
Use this item to set the address for the onboard serial port1 or disable it.
• Serial Port2 Address
Use this item to set the address for the onboard serial port2 or disable it.
• Parallel Port Address
This item specifies the I/O address used by the parallel port.
• Parallel Port Mode
This item specifies the parallel port mode.
• Parallel Port IRQ
Use this item to set the IRQ for the parallel port.
•
Configure SATA as
Allows you to select ATA controller operator Mode.
• SATA Run Mode Configuration
Available options: Enhanced ， Compatible
・ Press < Esc > key to return to " Advanced " menu.
►
Chipset Configuration
Click <Enter> key to enter its submenu.