- 1 -
JW-D525M-GT User's Manual
►
SATA1/2
This item sets the status of auto detection of SATA/IDE devices while enterting setup, and
BIOS will auto detects the presence of SATA/IDE devices. Press "Enter" Key to enter the
submenu.
•
Type
Auto detect IDE port device type;
•
LBA/Large Mode
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device
supports this mode, and if the device was not previously formatted with LBA mode disabled.
•
Block (Multi-Sector Transfer)
Enables or disables data multi-sectors transfers. When set to [Auto] , the data transfer from
and to the device occurs multiple sectors at a time if the device supports multi-sector transfer
frature. When set to [Disabled] , the data transfer from and to the device occurs one sector at
a time.
•
PIO Mode
Allows you to select the data transfer mode.
•
DMA Mode
Selects the DMA mode.
•
S.M.A.R.T
Set the Smart Monitoring, Analysis, and Reporting Technology.
•
32Bit Data Transfer
Enables or disables 32-bit data transfer.
BIOS SETUP UTILITY
Main
SATA1
Select the type
of device connected
to the system.
←
Select Screen
↑
↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Device :Hard Disk
Vendor :ST380215AS
Size :80.0GB
LBA Mode :Supported
Block Mode:16Sectors
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-6
S.M.A.R.T.:Supported
LBA/Large Mode
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO ModeL
DMA Mode
S.M.A.R.T
32Bit Data Transfer
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
v02.68 (C)Copyright 1985-2009, American Megatrends, Inc.
